Author Topic: Bridge-IT connected to other Codec Equipment  (Read 105 times)

FrankS

  • Default Avatar
  • Posts: 1
  • Reply #0
    May 25, 2018, 06:45:59 pm

Hello Good Afternoon,

I have a question about my Bridge-IT:

How to make a connection to another codec (Prodys Prontonet) Or Comrex Acces Rack. What is the best way to do this on ip?

I have made a connection and in the remote control software of Bridge -IT
it is connected to the other codec (visual) if my college is watching on the 2  codecs there is no connection. I have a message every 37 seconds that says: Audio loss detected

Can you help me, to explain how I make a good connection to another Ip codec.

Thank you!

Kind regards,

Frank Smit
Smit Audio Engineering




« Last Edit: May 25, 2018, 07:05:37 pm by FrankS »

Glenn

  • Global Moderator
  • Default Avatar
  • Posts: 68
  • Reply #1
    May 28, 2018, 08:34:36 am

Hi Frank,

We have an interoperability document you can download at http://www.tieline.com/files/files/1285_Tieline_G5_IP_and_ISDN_compatibility_v.1.1_20170104.pdf which explains how to set up IP connections between Tieline G5 codecs and a Prodys Prontonet, or Comrex Access rack codecs using SIP. Given there are numerous variables when making a connection, such as algorithm, bit rate, type of IP network being used etc., if you have any issues it would be best to email support@tieline.com. This will allow us to provide detailed support for making these types of connections.

Hope that assists.

Regards,

Glenn

 

Join Tieline.com Forum - It's Free

Become a member of the Tieline forum today!

Member Login

Email AddressPassword
Forgot your password?